API 6A Wellhead Flanges vs ANSI ASME B16.5 Flanges Guide

Key differences

• Direct vs derated pressure: A 6A 5K flange means 5,000 psi working pressure at the rated temperature class. A B16.5 Class 1500 flange in A105 carbon steel does not give a fixed pressure independent of temperature; the allowable pressure is read from the pressure-temperature table and reduces as temperature rises.
• Higher pressure for the same envelope: Industry references note that a 6A flange with the same physical envelope as a B16.5 Class 600 is rated for 2,000 psi, and one matching Class 1500 is rated for 5,000 psi. Bolt-up forces and ring grooves are correspondingly different.
• RTJ mandatory: API 6A flanges use RTJ exclusively. RF or FF substitution is not allowed.
• Service categories: 6A material classes DD, EE, FF and HH are intended for sour service per NACE MR0175 / ISO 15156 trim limits.
• Quality: PSL 4 invokes the strictest NDE, hardness mapping and traceability; B16.5 has no equivalent grading.

Where they overlap

The overlap is mostly geometric coincidence: certain 6B / 6BX dimensions correspond to B16.5 NPS / class combinations on paper. They are still NOT interchangeable in the field, because pressure rating, ring groove and bolt grade differ. Adapter / crossover flanges are designed for the transition from 6A wellhead to B16.5 process piping.

We forge wellhead-style flanges and downstream piping flanges on the same press; see our forged flanges and non-standard forgings.

When to choose which

• Wellhead, Christmas tree, BOP, choke and kill, drilling spool: API 6A.
• Process piping downstream of the choke manifold: usually ASME B16.5 / B16.47 with B16.34 valves.
• Adapter flanges between the two: bespoke design, usually 6A on one face and B16.5 on the other.

Procurement / spec checklist

1. For 6A: state size, working pressure (e.g. 5K), temperature class, material class and PSL. Example: "6BX flange, 7-1/16 inch 10K, temperature class P-U, material class EE, PSL 3".
2. For B16.5: state NPS, class, face type, material grade and standard reference.
3. Specify ring gasket type (R, RX or BX) consistent with the flange type.
4. For sour service, link to NACE MR0175.
5. Require manufacturer documentation (3.1 or 3.2 MTR) and PSL test reports.
6. Match the seamless steel pipes and butt-welding fittings downstream of any 6A-to-B16.5 transition flange.

Need a wellhead-to-process adapter quoted? Send the geometry and ratings via our inquiry form.

Sources

• https://wernerflanges.com/api-6a-vs-asme-b16-5-flanges-differences-applications-werner-flanges/
• https://ssmalloys.com/api-6a-vs-asme-ansi-flanges/
• https://sunhyings.com/stainless-steel-flange/standards/api-6a/
• https://globalsupplyline.com.au/wp-content/uploads/2014/09/API6A_Trim_Material_Ratings.pdf
• https://www.engineeringtoolbox.com/api-flanges-d_746.html

ASTM A105 / A182 / A350; carbon, alloy and stainless steel